Features:
1:Plate-ring load cell are installed in the side by a fixed rope, etc. to measure tension of a load cell, its bottom two holes through the pin, hanging panels, with wire rope connected to form a taut state, to measure the pull rope .
2:Such products are mainly used for electric hoist and load cell not easy installed on the crane.
3:Stainless steel construction, corrosion resistance and anti-rust performance, applicable to a variety of harsh environments.
4:High precision, used for overload protection, while the weight can be accurately measured.


Technical Parameter:

Rated Load	2/3/5/10/15/20/30t
Sensitivity	(1.5±0.1%) mV/V
Combined Error	±0.05% F.S
Creep Error（30min）	±0.03% F.S
Zero Balance	±1% F.S
Temp. Effect On Zero:	±0.05% F.S/10℃
Temp. Effect On Span:	±0.05% F.S/10℃
Input Resistance:	385±5Ω
Output Resistance:	350±2Ω
Insulation Resistance:	≥5000MΩ
Operating Temperature Range	-30~+70℃
Maximum Safe Over Load:	150%F.S
Ultimate Over Load:	200%F.S
Recommend Excitation Voltage:	10~12V DC
Maximum Excitation Voltage:	15V DC
Sealing Class:	IP67
Element Material:	Alloy Steel/ Stainless Steel
Cable:	Length=L:3m
Citation	GB/T7551-1997/ OIML R60
Mode Of Connection	Red(Input+),Black(Input-),Green(Output+),White(Output-)