Name:CL1529I/1534I(FFL)

Details
Residual Capacity at different lifting height
1KG=2.2LB 1INCH=25.4MM

Up to h3 mm	ACTUAL CAPACITY (Q) kg
2500	1500	1000
2900	1000	700
3400	800	500
Load centre distance (C)mm	600	700

Smooth travel and lift combine excellent controls to reduces product damages and increases productivity.
Lift limit switch operates at maximum lift height to shut off pump motor.
A heavy-duty 24-volt electrical system provides good travel and lift speeds.
High quality hydraulic pump assures very little noise, maximum efficiency and durability.
Drive units is equipped with an electromagnetic brake that is spring applied and electrically released. The brake is activated by the control handle position. The handle is ergonmically designed with a raise, lower and horn button.
Speed automatically reduces when driving with the forks at a height of 12" or higher.
Small turn radius makes it suitable for narrow passage ways.
The CURTIS electronic controller helps provide plenty of low end torgue while in creasing the motor and battery life.
Foot pedal reduces fatigue.
Built-in charger.
Conforms to EN 1726-1 and EN 1175-1
With CURTIS electric control from Germany
Equipped with METRLROTA driving wheel and HPI pump unit from Europe.
Heavy duty design with top quality mast construction of HOSCH steel from Germany.
1KG=2.2LB 1INCH=25.4MM

Identification	1.2	Manufacturer’s type designation		CL1529I	CL1529IFFL	CL1534I	CL1534IFFL
	1.3	Drive: electric(battery or mains),diesel, petrol, fuel gas, manual		electric
	1.4	Type of operation:hand, pedestrian, standing ,seated, order-picker		Pedestrian
	1.5	Load Capacity /rated load	Q (t)	1.5
	1.6	Load center distance	C mm	600
	1.8	Load distance, centre of drive axle to fork	X mm	677
	1.9	Wheelbase	y mm	1183		1168
Weights	2.1	service Weight	Kg	1020	1040	1120	1140
	2.2	Axle loading, laden front/rear	Kg	1195/1325	1205/1335	1245/1375	1225/1385
	2.3	Axle loadings, unload front/rear	Kg	755/265	770/270	826/295	840/300
Wheels ,Chassis	3.1	Tyres:solid rubber, superelastic, pneumatic, polyurethane)		polyurethane
	3.2	Tyre size, front		250x78
	3.3	Tyre size, rear		80x70 1)
	3.4	Additional wheels(dimensions)		150x54
	3.5	Wheels, number front/rear(x=driven wheels)		1x+2/4
	3.6	Track width,front	b10(mm)	685
	3.7	Track width,rear	b11(mm)	390/515
Basic Dimensions	4.2	Lowered mast height	h1(mm)	1950	1950	1695	1695
	4.3	Free lift	h2(mm)	144	1482	-	1104
	4.4	Lift height	h3(mm)	2814	2814	3314	3314
	4.5	Extended mast height	h4(mm)	3280	3280	3904	3904
	4.9	Height of tiller in drive position min./max.	h14(mm)	985/1365
	4.15	Lowered height	h13(mm)	86
	4.19	Overall length	l1(mm)	1940		1925
	4.20	Length to face of forks	l2(mm)	790		775
	4.21	Overall width	b1(mm)	805
	4.22	Fork dimensions	s/e/l	60/180/1150
	4.25	Width over forks	b5(mm)	570/695
	4.32	Ground clearance, center of wheelbase	m2(mm)	50
	4.33	Aisle width for pallets 1000x1200 crossways	Ast(mm)	2162		2147
	4.34	Aisle width for pallets 800x1200 lengthways	Ast(mm)	2136		2123
	4.35	Turning radius	Wa(mm)	1480		1465
Performance Data	5.1	Travel Speed, laden/ unload	km/h	5.1/5.4
	5.2	Lift speed, laden/unload	mm/s	105/170
	5.3	Lowering speed, laden/ unload	mm/s	100/95
	5.8	Max.gradient performance, laden/ unload	%	6/12
	5.10	Service brake		Electromagnetic
E-Motor	6.1	Drive motor rating s2 60min	kw	1.2
	6.2	Lift motor rating at s3 15%	kw	3.0
	6.3	Battery acc. To DIN, no		3PZS
	6.4	Battery voltage, normal capacity	V/Ah	24/210
Others	8.1	Type of drive control		MOSFET Control
	8.4	Sound level at driver’s ear acc.to EN12053	dB(A)	67
1)Single wheel 80x93